Art 746GR Check N RollTM 3mm Nitrile

Art 746GR Check N RollTM 3mm Nitrile 
  

Art 746GR Check N RollTM 3mm Nitrile

Style

NR (nitrile) Rubber

Surface industrial chequer plate profile

Hardness (ISO7619, DIN 53504) 65 Shore A

Specific gravity (DIN53504) black1.5g/m3

Tensile Strength (DIN53504)3.5 Mpa

Elongation at break (DIN53504) 250%

Abrasive resistance (ISO4649, DIN53516)300-500mm3

Resistance to temperature black , -10%, +70 oC

Sound Reduction : 20dB

Dimensions

Stock sizes black 140cm x 10m

Environmental

Distributed from the Environmentally cleanest tile factory in Europe

INSTALLATION

Sub floors should be clean, dry and flat and prepared in accordance with BS5325. Timber floors should be covered with plywood or other appropriate sheet materials. For tiles use F Ball tackifier F41 or Laybond 79. Tiles may be laid tessellated or broadloom. Tiles should be allowed to condition for a minimum of 24 hours at the expected temperature and humidity prevailing when the building is in use. Always use seam sealer if an impermeable finish is required.

Further installation information is available from the Paragon Sales Office.

COLOUR

For technical reasons, as with all textile materials, it may not be possible to colour match from different batches. Orders requiring colour match should be placed at the same time. Production may therefore show variations to the sample card.

MAINTENANCE

It is recommended that a maintenance schedule be initiated from the date of installation to achieve maximum life expectancy of the product.

Regular vacuum cleaning with a twin motored upright vacuum cleaner is essential. All spillages and stains should be attended to immediately. For detailed information, please consult the Paragon cleaning and maintenance guide. It is imperative that all internal carpets are well protected from outside soiling and moisture by the use of barrier matting such as MatWorks, also available from Paragon.

MATWORKS WARRANTY